That is not posted anywhere that I am aware of, most (if not all) are common to other server platforms. Here are the ones I remember at the top of my mind:
BIOS_POST_CMPLT << Was BIOS Completed?
P_CATERR_N << Processor Catastrophic errors
RISER1_CNIC_PRS << PCIe Riser card presence
MAIN_POWER_PRS << Power presence
SEL_FULLNESS << System Event Log fullness in %
BIOSPOST_TIMEOUT << Did BIOS POST timeput?
POWER_ON_FAIL << Did the server fail to power on?
FAN1_PRSNT << Fan# presence
FAN1_TACH1 << Fan# speed, normally two fans per module
LED_FAN1_FAULT << Fan's LED fault
RISER2_PRESENT << Riser 2 presence
RISER1_PRESENT << Riser 1 presence
PSU1_STATUS << PSU1 status
PSU2_STATUS << PSU2 status
MLOM_PRESENT << MLOM (Network) presence
LED_PSU_STATUS << PSU LEDSs
LED_TEMP_STATUS << Temperature LED
LED_FAN_STATUS << FAN LED
LED_HLTH_STATUS << Health LED
PS_RDNDNT_MODE << PSUs redundancy
P1_TEMP_SENS << Processor temperature
HDD1_STATUS << Hard drive status
DDR3_P1_A1_PRS << Memory A1 presence
POWER_USAGE << =
PSU1_VOUT << PSU1 voltage out
VICP81E_0_PRS << VIC card (CNA) presence
VICP81E_0_TMP1 << VIC card (CNA) temperature
P1_PRESENT << Processor presence
DDR3_P1_A1_ECC << Memory Error Correction Code readings
PSU1_TEMP << PSU temperature
-Kenny
