02-16-2011 11:36 PM
hi all,
I got a pair of 5548, vPC works great. However the vPC consistency check show the two switch configs are different! I don't know why vPC still works fine. See the below output of the show vpc consistency-parameters global command. it's weird that from output of each switch, the local value is different from peer value, but if you just see the local value from both switch, they are the same. what's going on here?
thanks
ming
N5k-1# show vpc con g
Legend:
Type 1 : vPC will be suspended in case of mismatch
Name Type Local Value Peer Value
------------- ---- ---------------------- -----------------------
QoS 2 ([], [], [], [], [], ([], [], [], [], [],
[]) [])
Network QoS (MTU) 2 (1538, 0, 0, 0, 0, 0) (1538, 0, 0, 0, 0, 0)
Network Qos (Pause) 2 (F, F, F, F, F, F) (1538, 0, 0, 0, 0, 0)
Input Queuing (Bandwidth) 2 (100, 0, 0, 0, 0, 0) (100, 0, 0, 0, 0, 0)
Input Queuing (Absolute 2 (F, F, F, F, F, F) (100, 0, 0, 0, 0, 0)
Priority)
Output Queuing (Bandwidth) 2 (100, 0, 0, 0, 0, 0) (100, 0, 0, 0, 0, 0)
Output Queuing (Absolute 2 (F, F, F, F, F, F) (100, 0, 0, 0, 0, 0)
Priority)
STP Mode 1 Rapid-PVST Rapid-PVST
STP Disabled 1 None None
STP MST Region Name 1 "" ""
STP MST Region Revision 1 0 0
STP MST Region Instance to 1
VLAN Mapping
STP Loopguard 1 Disabled Disabled
STP Bridge Assurance 1 Enabled Enabled
STP Port Type, Edge 1 Normal, Disabled, Normal, Disabled,
BPDUFilter, Edge BPDUGuard Disabled Disabled
STP MST Simulate PVST 1 Enabled Enabled
VTP domain 2 PERAT8 PERAT8
VTP version 2 2 2
VTP mode 2 Transparent Transparent
VTP password 2
VTP pruning status 2 Disabled Disabled
Allowed VLANs - 1,8,801-804 1,8,801-804
Local suspended VLANs - - -
N5k-1#
Solved! Go to Solution.
02-17-2011 06:22 PM
This is related to the following bug
CSCtl06882 - 'show vpc consistency-parameters global' showing incorrect value for QoS
This defect is currently Assigned State but is Cosmetic in Nature, not service impacting. Hence you will have no problem with vpc.
Thanks, Vinayak
02-17-2011 06:22 PM
This is related to the following bug
CSCtl06882 - 'show vpc consistency-parameters global' showing incorrect value for QoS
This defect is currently Assigned State but is Cosmetic in Nature, not service impacting. Hence you will have no problem with vpc.
Thanks, Vinayak
02-17-2011 09:13 PM
I thought it must be a cosmetic bug, great to get confirmation. Thanks a lot.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide