08-24-2017 03:15 AM - edited 03-01-2019 01:39 PM
I have a set 2232TN-E connected to Nexus C7004, with the objective of connecting Nutanix Hyperconverged solution.
I'm aware of certain ACIS limitations (from my understanding -1280KB per ASIC group-8 ports although documentation on this is limited).
The issue that I am having is identifiying a way to:
Interface monitoring (bps) I don't believe will provide the sub-second information that will be required.
Any assistance will be mush apprieciated.
Solved! Go to Solution.
09-13-2017 10:45 AM
Hi Brendan,
Unfortunately, support for SNMP monitoring of Fabric Extender ASICs and their corresponding drops is still not present nor roadmapped to any particular release.
You can definitely see if the 2232's ASICs are oversubscribed by checking for tail drops. This document can walk you through the entire process.
Note: The document was written for the N5K/N6K but all the FEX troubleshooting commands remain the same across all platforms.
Hope this helps!
- Andrea
09-13-2017 10:45 AM
Hi Brendan,
Unfortunately, support for SNMP monitoring of Fabric Extender ASICs and their corresponding drops is still not present nor roadmapped to any particular release.
You can definitely see if the 2232's ASICs are oversubscribed by checking for tail drops. This document can walk you through the entire process.
Note: The document was written for the N5K/N6K but all the FEX troubleshooting commands remain the same across all platforms.
Hope this helps!
- Andrea
10-05-2017 11:46 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide