10-08-2012 04:12 PM
Folks,
I have a c series server connected to a nexus 7000 via the storage vdc using shared port. The c series does not have anything on it right now.
I do not see any flogi information on my storage vdc. Any ideas would be highly appreciated.
Thanks,
Tarun
10-08-2012 11:24 PM
Tarun,
Can you please provide additional details like - OS, adapter model, whether OS up and running on the server ?
Padma
10-08-2012 11:58 PM
Parma,
The C series has p81 card installed and currently has no OS on it. It is connected to the storage vdc of a nexus 7000.
I do not see anything in the show flogi database.
10-09-2012 04:22 AM
[This topic would be better suited for the Unified Compuint section]
Tarun,
Are you attempting ot Boot from SAN? If so, this sounds like a configuration problem. Could be either a zoning or masking issue.
To start, when the C-Series is booting, break into the BIOS with F2 - this will force the P81 VIC to try and keep attempting FLOGI.
Can you paste the N7K relevant config including the zoning configuration and port configuration. We also need your topology and complete information in order to even hazard a guess at your issue.
Regards,
Robert
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide