Hi all ,
I'm working on XRv9k which already installed on hypervisor ESXI 6.5 , When i tried to config QinQ it's not work and can ad only one Vlan as a second second-dot1q .. How i can add range of VLAN in the second-dot1q
interface GigabitEthernet0/0/0/2.10
encapsulation dot1q 10 second-dot1q 9
!
When i try to add group of VLAN
RP/0/RP0/CPU0:ios(config-subif)#encapsulation dot1q 10 second-dot1q 2-9
^
% Invalid input detected at '^' marker.
Any advice plz
Thanks in advance