SNI over X.25

[ermanno.lavezzoli]

HI, I'm Ermanno Lavezzoli from Seceti Italy.

I have a couple of FEP (Ibm 3745) connected through X.25 (NPSI). At VTAM level they talk via SNI gateway-to-gateway.

I have to eliminate the FEP in one side transforming the SNI gateway-to-gateway into single-gateway.

Is it possible to connect the X.25 line to a router which in turn is connected to host through an OSA Ethernet? If possible, please give a sample.

The function the router should perform is QLLC over X.25, given that the FEP/NPSI talks using QLLC over X.25.

I found samples of FEP-TO-FEP over SDLC (SDLLC), but nothing about FEP-TO_FEP over X.25.

[jolmo]

Hi Ermanno

Take a look at this and let us know if it is what you are looking for:

http://www.cisco.com/en/US/tech/tk331/tk336/technologies_configuration_example09186a0080093fba.shtml

HTH

[ermanno.lavezzoli]

Sorry, I'm not been able to explain the problem in the previous message, so I made a scheme of today configuration and the configuration for tomorrov, given that the solution is possible with router facilities.

Thank you in advance for your kindness.

[mbinzer]

Hi,

can you have a look at the following URL and let us know if this is coming close to what you look for:

http://www.cisco.com/en/US/partner/tech/tk331/tk336/technologies_configuration_example09186a0080093fba.shtml

thanks...

Matthias

[mbinzer]

Hi,

sorry i have just seen that you were already offered the link i just send.

Sorry my bad, i should have read through all the responses first.

Matthias

[Rodrigo Marchina Soares]

Hi Ermano!

My name is Rodrigo, from Brazil, Sao Paulo.

I have parents in Italy!

I have the same solution that you want.

We use FEP to FEP solution with routers, here in my company.

Please, write me, we can speak about it.

Rodrigo Marchina Soares

gudines@terra.com.br