cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
337
Views
5
Helpful
1
Replies

Teamed Nic using FEX 2248TP

dawsonpettifer1
Level 1
Level 1

I currently have the following topology:-

I require to configure LACP for teamed NIC. Is this possible and if so, is this achieved by using Port-channel or vpc? The software version is 5.2(1)N1(4)

I have looked online and find conflicting views on this?

1 Accepted Solution

Accepted Solutions

Tyler Jeffords
Cisco Employee
Cisco Employee

Yes this is possible, this can be done by adding the FEX HIF ports into a mode active port-channel. No vPC ID is needed under the port-channel since the FEXs are already dual homed in a vPC.

Take a look at the following link:

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/mkt_ops_guides/513_n1_1/n5k_enhanced_vpc.html

HTH,

Tyler Jeffords

View solution in original post

1 Reply 1

Tyler Jeffords
Cisco Employee
Cisco Employee

Yes this is possible, this can be done by adding the FEX HIF ports into a mode active port-channel. No vPC ID is needed under the port-channel since the FEXs are already dual homed in a vPC.

Take a look at the following link:

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/mkt_ops_guides/513_n1_1/n5k_enhanced_vpc.html

HTH,

Tyler Jeffords