05-08-2016 11:24 AM
I currently have the following topology:-
I require to configure LACP for teamed NIC. Is this possible and if so, is this achieved by using Port-channel or vpc? The software version is 5.2(1)N1(4)
I have looked online and find conflicting views on this?
Solved! Go to Solution.
05-12-2016 08:20 AM
Yes this is possible, this can be done by adding the FEX HIF ports into a mode active port-channel. No vPC ID is needed under the port-channel since the FEXs are already dual homed in a vPC.
Take a look at the following link:
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/mkt_ops_guides/513_n1_1/n5k_enhanced_vpc.html
HTH,
Tyler Jeffords
05-12-2016 08:20 AM
Yes this is possible, this can be done by adding the FEX HIF ports into a mode active port-channel. No vPC ID is needed under the port-channel since the FEXs are already dual homed in a vPC.
Take a look at the following link:
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/mkt_ops_guides/513_n1_1/n5k_enhanced_vpc.html
HTH,
Tyler Jeffords
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide