2 units of N2K-C2348UPQ running for months and today one of unit failed.
On chasis "STAT" LED it is solid amber color and all the ports LED solid amber on.
I had rebooted , by power cycle but no help.
How to tell was it booting / hang or it is overtemperature ??
Any other troubleshooting guide to confirm this N2K is still working or need RMA?
Note: power supply confirm in working condition.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus2000/hw/installation/guide/nexus_2000_hig/LEDs.html
STAT:
On
(amber) | The module is booting or running diagnostics. An overtemperature condition has occurred. The temperature threshold has been exceeded by a small value during environmental monitoring. |
Port:
Solid on
(amber) | The module or port is disabled through the CLI command or the module is initializing. |
