UCSC-PCIE-IRJ45 support on UCS-C220-M6S servers

[Binu Savariyar]

We are trying to add a UCSC-PCIE-IRJ45 on UCS-C220-M6S servers with the below Bill of materials,  however, we are not able to install this PCIe card, do we need any mounting bracket to support this card (UCSC-PCIE-IRJ45). 

UCSC-PCIE-IRJ45 - this card was taken from previous M5 servers. 

[Wes Austin]

What problem are you have installing the card? What slot are you attempting to install it in?

If you ordered the card and the server together, the card comes pre-installed. If you order the card by itself, it will come with half height and full height brackets.

Please provide more supporting information so we can attempt to help.

[Binu Savariyar]

we are trying to install this card in PCIE 01 slot.

The card which we are trying to install is taken from an old C240-M5-SX server, 

[Wes Austin]

https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/c220m6-sff-specsheet.pdf 

The card is supported in the server on riser 1,2,3 per the spec sheet above.

So what is the problem that you are having? Does it not show up in the CIMC?

[Binu Savariyar]

The card which we have is not fitting correctly on the PCIE 1 slot, I assume it's due to a half-height card and the PCIe slot is on full height.