04-16-2023 03:33 PM
We are trying to add a UCSC-PCIE-IRJ45 on UCS-C220-M6S servers with the below Bill of materials, however, we are not able to install this PCIe card, do we need any mounting bracket to support this card (UCSC-PCIE-IRJ45).
UCSC-PCIE-IRJ45 - this card was taken from previous M5 servers.
04-16-2023 03:51 PM
What problem are you have installing the card? What slot are you attempting to install it in?
If you ordered the card and the server together, the card comes pre-installed. If you order the card by itself, it will come with half height and full height brackets.
Please provide more supporting information so we can attempt to help.
04-16-2023 03:54 PM
we are trying to install this card in PCIE 01 slot.
The card which we are trying to install is taken from an old C240-M5-SX server,
04-16-2023 04:01 PM
The card is supported in the server on riser 1,2,3 per the spec sheet above.
So what is the problem that you are having? Does it not show up in the CIMC?
04-16-2023 04:25 PM
The card which we have is not fitting correctly on the PCIE 1 slot, I assume it's due to a half-height card and the PCIe slot is on full height.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide