windows 2016 operating system installation in cisco ucsc240 m4 server

[mlkanth01]

hi all

i have installed windows 2016 server operating system on cisco ucs c240 server, but the disk space is displayed  as 2 partions and one partion we are unable to use.

can any one suggest and help me clearing the issue.

Lakshmikanth

[Walter Dey]

Have a look at

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/os-install-guides/windows/b_C-Series_Windows_Install/CSERIES-WINDOWS_chapter_011.html

which only applies to Windows 2008 and 2012.

As you can see from http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html

W2016 is not yet supported !

[mlkanth01]

Hi walter dey

thanks for the reply.

i have seen the OS compatibility matrix and check the that no information about 2016 OS.

but actually i have installed the OS and found that by default it is taking as 2 partitions instead of one single partition (i have configured RAID5).

regards

Lakshmikanth

[Keny Perez]

If not supported, you can have many untested outcomes and we will not be able to support you and/or provide a resolution that will comply with what our devs have approved/tested.

It doesnt mean it wont work, it means we have not tested it enough to know what to expect from it.

-Kenny

[mlkanth01]

Hi Kenny

thanks for your reply.

hope it will be tested in near future by cisco and come out with recommended suggestions.

regards

Lakshmikanth