Windows Integrated 802.1x Authentication/Authorization/Accouting Using Sx300/500 Switch and ISE and ...

jialbert · ‎05-14-2013

Sx300/500 series switches can team together with Cisco ISE (Identity Service Engine) and Windows AD server to provide integrated 802.1x AAA (authentication/ authorization/ accouting) using Windows domain username/password for end user device.

This document also explains how to configure switch to support 802.1x authentication, dynamic VLAN authorization, and accouting.

802.1x single/multiple host and multiple session, guest Vlan and MAC based authentication is also explained.

Sinaga · ‎11-03-2017

Hello friends,

I'm doing an 802.1X authentication implementation with a server radius using multi-host mode.

for server radius, I use windows server 2008 R2 Enterprise with installed roles like AD DS, AD CS, DNS Server, DHCP Server, Network Policy and Access Services (NPS). I use PEAP -MsChapV2 method.

for authentication when successfully will be redirected to vlan 10, and if failed will be directed to vlan 30.

for authenticator and supplicant switches, I use Cisco Catalyst 2960-CX series.

network topology:

3 clients --- g0/2, g0/3, g0/4 --- suplicant switch (switch2) --- g0/1 (supplicant switch) to g0/3 --- switch authenticator (switch1) - g0/1 - server radius.

script authenticator:

Switch1#sh run

Building configuration...

Current configuration : 3391 bytes

!

! Last configuration change at 06:17:02 UTC Fri Nov 3 2017

! NVRAM config last updated at 06:17:09 UTC Fri Nov 3 2017

!

version 15.2

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname Switch

!

boot-start-marker

boot-end-marker

!

aaa new-model

!

aaa authentication dot1x default group radius

aaa authorization network default group radius

aaa accounting network default start-stop group radius

!

aaa session-id common

system mtu routing 1500

!

crypto pki trustpoint TP-self-signed-3753304576

enrollment selfsigned

subject-name cn=IOS-Self-Signed-Certificate-3753304576

revocation-check none

rsakeypair TP-self-signed-3753304576

!

crypto pki certificate chain TP-self-signed-3753304576

certificate self-signed 01

3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030

31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274

69666963 6174652D 33373533 33303435 3736301E 170D3137 31303235 30373031

31325A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649

4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 37353333

30343537 3630819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281

8100C5DB 3CB9DFF2 77BDF4BA 5A9A2842 B71574A0 58FC948F EF638567 64FCCDC0

F842FB87 D1A7509F CF178E66 81578924 AA24C583 F6F82921 898DA3A5 826F81B5

4DB19C29 35ECE681 D8A60EFF 2587AA24 F87A606D B1645B14 8F8CCBA5 2441947C

2F646F38 AB657A8D 2E2A7EED F716FF61 147A875D 654C2180 3B6C5789 3618C7FE

BCF30203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603

551D2304 18301680 147771B2 F7F18FB4 1E7361EF E18B497D DEDDD572 CC301D06

03551D0E 04160414 7771B2F7 F18FB41E 7361EFE1 8B497DDE DDD572CC 300D0609

2A864886 F70D0101 05050003 81810085 2E8424AF 2FE7AEFC 74D07E7C BE1E141F

79F2E7EC 263877AE F6532F13 4D069CDA 80C7A219 8AEACB31 443CC054 9466502F

40317CF6 4D5F7409 D05590CE D74E29C4 F0A95E69 D4B26372 0086C7E9 14A37DBE

3DE0BBB7 355DF39B 5169479C 24BE990B 91E13BEE 99C46D24 1A00CFDC 0D5C60A0

2BEEA481 0C60152E 49A59BCC 0E7D62

quit

dot1x system-auth-control

!

spanning-tree mode rapid-pvst

spanning-tree extend system-id

!

vlan internal allocation policy ascending

!

interface GigabitEthernet0/1

switchport mode access

!

interface GigabitEthernet0/2

!

interface GigabitEthernet0/3

switchport mode access

authentication event fail action authorize vlan 30

authentication event no-response action authorize vlan 30

authentication host-mode multi-host

authentication port-control auto

dot1x pae authenticator

!

interface GigabitEthernet0/4

!

interface GigabitEthernet0/5

!

interface GigabitEthernet0/6

!

interface GigabitEthernet0/7

!

interface GigabitEthernet0/8

!

interface GigabitEthernet0/9

!

interface GigabitEthernet0/10

!

interface GigabitEthernet0/11

!

interface GigabitEthernet0/12

!

interface Vlan1

ip address 10.123.10.250 255.255.255.0

!

interface Vlan10

ip address 172.16.10.250 255.255.255.0

ip helper-address 10.123.10.10

!

interface Vlan30

ip address 172.16.30.250 255.255.255.0

ip helper-address 10.123.10.10

!

ip forward-protocol nd

ip http server

ip http secure-server

!

radius server host

address ipv4 10.123.10.10 auth-port 1812 acct-port 1813

key 12345

!

line con 0

line vty 5 15

!

end

============================================================================

script switch supplicant:

Switch2#sh run