08-25-2011 06:51 PM
Hi,
I got a new switch and am trying to connect a UCS server to it. I can ping the switch just fine but when I try to use IE8 or firefox, I can't get to the web interface to configure it.
Here's my setup:
Cisco UCS C210 M2
IP = 192.168.1.100
Subnet = 255.555.255.0
Default Gateway = 192.168.1.1
SG200-18 Switch
Default IP = 192.168.1.254 (it's not DHCP)
Pointers anyone??
Tom G
Solved! Go to Solution.
08-29-2011 03:48 AM
You will have to set a static IP address on the PC that is connected to the switch. The IP address of the PC
has to be on the same subnet as the 192.168.1.254. You might have to try something lower than IE8. It should
work with Firefox and IE7. There is also a browser called GreenBrowser that usually works well with out switches.
THANKS
Rick Roe
Cisco Small Business Support Center
08-29-2011 03:48 AM
You will have to set a static IP address on the PC that is connected to the switch. The IP address of the PC
has to be on the same subnet as the 192.168.1.254. You might have to try something lower than IE8. It should
work with Firefox and IE7. There is also a browser called GreenBrowser that usually works well with out switches.
THANKS
Rick Roe
Cisco Small Business Support Center
08-31-2011 09:11 AM
Thanks Rick! I got it to work with Firefox. I forgot to set proxy settings initially but all is good now.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide