cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2716
Views
0
Helpful
1
Replies

SG300-28 GUI different than online SG300-48 simulator.

neoseer007
Level 1
Level 1

Hi,

      These are our first switches and seems like GUI is lot different than the online. Out intervlan routing is o not working. I am absolutely sure that I setup the switch in L3 mode since it allows me to create mutiple interfaces. I am hoping that this GUI issue is related to interVLAN routing and would help me move forward.

Below is the blog I started for InterVlan issue

https://supportforums.cisco.com/message/3432119#3432119

This is the link for online simulator and what I see in its IP tab. I know this switch is not SG300.

http://www.cisco.com/assets/sol/sb/Nikola_GUI/SF-300-24P/config/home.htm

This is what I see on our switch.

Our switch version

switchd64684#show version                                                                                                                                              

SW version    1.1.0.73 ( date  19-Jun-2011 time  18:10:49 )

Boot version    1.0.0.4 ( date  08-Apr-2010 time  16:37:57 )

HW version    V01

Thank you,

Sreenath.

1 Reply 1

David Hornstein
Level 7
Level 7

Hi Sreenath,

Yes, you are correct the emaulator you are looking at has not been updated to the current version of firmware.

regards Dave