Hi,I am trying to replace our ageing 9222is with 9250s in a FICON/FCIP setup.The 9222s talk to each other ok and the 9250s (in a test environment) can talk to each other ok. The problem occurs when i swap out a 9222 with a 9250 (i can't do both ends ...
Forum Posts
It's been awhile since I have done this. I added to new ISLs to the current fabric, no hosts connected yet. When I try to create the port channel in DCNM, I get a pop up window detailing this action is disruptive. Is the disruption only on the new sw...
I'm testing iSCSI with SN5420 + Symetrix and clients iSCSI for UNIX and WIN NT. I'm trying to validate the use of this technologie with small bandwith. Has someone tested something similar?? I also have advanced md promblems during formating process ...
Hi,I have a N5K-C5548UP, which is connected to an IBM SAN switch (IBM switch configured as AG mode, or something like port extender without zoning), with ports fc1/29-30. Recently I received the following syslog message for both ports: fc1/2909:51:04...
Resolved! Cisco 9132T maximum distance
Hello team,Trying to position Cisco 9132T, but may I know the maximum distance it supports? Client comparing Cisco with Brocade license Extended Fabric, I am assuming that feature Is included in the FOS by default, any suggestions please?
Hello guys, I would like to know after multiple ISL links between two MDS switches are configured as a port-channel, what will change regarding the traffic flow? For example, if I have two ISL links between two MDS switch, and the two links are not c...
Hello everyone I am configuring the replacement of a Nexus 5672UP, connected by 10GB Eth to a Storage NetApp AFF C190. It works NFS or iscsi. as I understand the replacement would be the N9K-C93180YC-FX, but I'm not sure if I need the ACI-STRG licens...
Salve, ho un NAS CISCO modello NSS324 con firmware versione 1.0.0. Vorrei aggiornare il firmware; potreste indicarmi quale versione installare e dove poterla scaricare? grazie
HelloDoes anybody give an information about the compatibility of Cisco SFP + Cisco SFP-H10GB-CU1M and HPE Ethernet 10Gb 2-port 530SFP + Adapter - will they work together?
It will be usefull because in many training courses we want the attendants to view the recording videos for more time. Now the only solution is to download the recordings manually. and then upload them to a shared folder at Google Drive.it will be a...
Hello all,Could you please tell me why my Nexus 5672UP FC port only support 100m?while I found on Cisco technical specifications: So,1) why does my Nexus 5672UP only show 100m (OM3 fiber)2) as we all know, DS-SFP-FC32G-SW supports 16Gbps, if I want t...
Is it possible to mount the Hyperflex NFS datastore on an EXSi host outside of the hyperflex environment?
Hi team,I have a question about UCSC-MRAID12G= , hope you can answer:When I BOM UCSC-MRAID12G=, does the device come with FWBC? If not, do I have to BOM separately FWBC for UCSC-MRAID12G=
Like the title says I have inherited 2 of these Nexus switches which are being used in production atm. I do not have the login information for them, and while I have read the instructions for how to recover the password I cannot see it stated in thos...
