Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear all I configured and connected the MDS-9148S switch with the Compellent 7020 array. I also connected the server to the switch using the Qlogic 2600 card. The array sees the WWNs that I have configured, but when added to the configuration, it sho...
Dear all. I have a problem with array connection using FC. The connection is made using the Cisco MDS-9148S switch and the Cisco UCS 240 M5 server with the FC Qlogic 2600 adapter with Vmware ESXi 7. After configuring the Fault Domain for connectivity...
Dear group members, I am asking you for help with my Cisco ASR1004. Well, I use the device as a BGP and BRAS router on the network. The network is not very big - it is about 4,000. users. The problem is that the device refuses to obey after a few hou...
Dear All.My PBX is acting weird. I have configured "Presence" on it, but although "Presence" works if I checking from the router console or using the contacts list in the phone menu, on the pinned phone numbers to the buttons on the phone the phone l...
Dear All. I have trouble with identifying by name for incoming connections comming from siptrunk. We have two PBX connected, Cisco CME - for desk phones (SIP Phones only) and Uniify OpenScape Business V2 for DECT calls. The problem is that Unify PBX ...
Sure, of course, the TAC would certainly be helpful here, but in our case it means the necessity to buy it, and as you know, circumstances are not always conducive to meeting such needs That's why I try to deal with it myself.
Thank you very much for this information. As I mentioned, I have already tried several different versions of the software and the problem persists. I have a question. Do ESP and SIP engines use separate software or is it provisioned for other modules...
Yes, thank you for your reply, honestly, what you pointed out best fits my problem, but from what I can see the thread has been abandoned. What do you think I should do now?
Yes thank you, that's how we do it now, but it's time consuming. The worst thing is that it is a production environment, and we cannot really afford several device reboots during the day. Do you have something else on your mind?
Hmm, do you think this problem may still exist in this version? asr1000rpx86-universalk9.16.06.08.SPA.bin. From what I read, this bug is affected with version 15.X. What do you think ?
