I have a Nexus 5548UP running 5.0(3)N2(1) and I want to enable the fport-channel-trunk command but I cannot enable this feature. When I issue a show feature I see it as a disabled feature but I cannot turn this on. I want to enable this so I can set up an F-Port Channel to a Fabric Interconnect 6120 (UCS).
I have enabled the following features
feature fcoe
system default switchport trunk mode off
feature telnet
cfs ipv4 distribute
cfs eth distribute
feature lacp
feature vpc
feature lldp
feature npv
feature npiv
I am also running the following licenses
MP-N5KUP-01(config)# sho license usage
Feature Ins Lic Status Expiry Date Comments
Count
--------------------------------------------------------------------------------
FCOE_NPV_PKG No - Unused -
FM_SERVER_PKG No - Unused -
ENTERPRISE_PKG Yes - Unused Never -
FC_FEATURES_PKG Yes - In use Never -
LAN_BASE_SERVICES_PKG No - Unused -
LAN_ENTERPRISE_SERVICES_PKG No - Unused -
--------------------------------------------------------------------------------
MP-N5KUP-01(config)#
Any help would be useful