02-03-2015 11:51 PM
Hi
If i have UCS 6248UP connect to UCS 2204XP, do i need Transceiver in UCS 6248UP?, one more thing what cable type i need to provide 10GB between Extender and Fabric Switch
Thanks
Solved! Go to Solution.
02-04-2015 03:10 AM
Most likely the distances in the rack allow this copper cables, which have embedded transceiver's
02-04-2015 03:50 AM
Yes ! This cables inter connect the UCS 2204XP in the Chassis with the Fabric interconnect UCS 6248UP, without requiring any other Transceivers.
02-04-2015 03:10 AM
Most likely the distances in the rack allow this copper cables, which have embedded transceiver's
02-04-2015 03:37 AM
That;s mean i do not need to buy module for fabric switch, bcz SFP-H10GB-CU5M can plug in without module, Right
Thanks
02-04-2015 03:50 AM
Yes ! This cables inter connect the UCS 2204XP in the Chassis with the Fabric interconnect UCS 6248UP, without requiring any other Transceivers.
02-04-2015 10:14 PM
Hi Mr.Walter
Hope you are fine...
Do i need "Fabric Interconnect Cluster Sync" between two UCS 6248UP, if they both connect to One Chassis
Thanx
02-04-2015 11:11 PM
Hi
Yes, it's mandatory for a FI (6248) Cluster configuration. Distance Limitation: 100 m; copper (1G Ethernet) cable back to back, no Switch in between.
The IOM (2204/2208) in the Chassis connect only to one FI (6248); no dual homing.
IOM left, FI left, or IOM fabric A, FI A
IOM right, FI right or IOM fabric B, FI B
Walter.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide