UCS 6248UP

[Toss Leey]

Hi

If i have UCS 6248UP connect to UCS 2204XP, do i need Transceiver in UCS 6248UP?,  one more thing what cable type i need to provide 10GB between Extender and Fabric Switch

Thanks

[Walter Dey · Accepted solution]

Most likely the distances in the rack allow this copper cables, which have embedded transceiver's

Table 3 SFP+ 10 Gb Ethernet Transceiver

Model	Description
SFP-H10GB-CU1M	10-Gb Ethernet—copper SFP+ (1 m, 3.28 ft.)
SFP-H10GB-CU3M	10-Gb Ethernet—copper SFP+ (3 m, 9.84 ft.)
SFP-H10GB-CU5M	10-Gb Ethernet—copper SFP+ (5 m, 16.4 ft.)
SFP-H10GB-ACU7M	10-Gb Ethernet—copper SFP+ (7 m, 22.9 ft.)
SFP-H10GB-ACU10M	10-Gb Ethernet—copper SFP+ (10 m, 32.8 ft.)

[Toss Leey]

That;s mean i do not need to buy module for fabric switch, bcz SFP-H10GB-CU5M can plug in without module, Right

Thanks

[Walter Dey · Accepted solution]

Yes ! This cables inter connect the UCS 2204XP in the Chassis with the Fabric interconnect UCS 6248UP, without requiring any other Transceivers.

[Toss Leey]

Hi Mr.Walter

Hope you are fine...

Do i need "Fabric Interconnect Cluster Sync" between two UCS 6248UP, if they both connect to One Chassis

Thanx

[Walter Dey]

Hi

Yes, it's mandatory for a FI (6248) Cluster configuration. Distance Limitation: 100 m; copper (1G Ethernet) cable back to back, no Switch in between.

The IOM (2204/2208) in the Chassis connect only to one FI (6248); no dual homing.

IOM left, FI left, or IOM fabric A, FI A

IOM right, FI right or IOM fabric B, FI B

Walter.