Will Nexus 7706 combined with Nexus FEX 2248TF-E support FCoE

[camo]

Hello,

We have a N7706 (module N77-F348XP-23) and  FEX N2248TF-E

This link says that N2248TF-E is a N2248TP-E

https://www.router-switch.com/pdf/n2k-c2248tf-e-datasheet.pdf

This link says that N2248TP-E does not support FCoE

https://www.cisco.com/c/en/us/products/switches/nexus-2000-series-fabric-extenders/models-comparison.html#~tab-1ge

This link says that N77-F348XP-23 supports FCoE

https://www.cisco.com/c/en/us/products/switches/nexus-7000-series-switches/models-comparison.html#~tab-f-series

So, at the end, Will Nexus 7706(F3) combined with Nexus FEX 2248TF-E support FCoE?

[balaji.bandi]

Look at the below guide for the correct model support FCoE

https://www.cisco.com/c/en/us/products/collateral/switches/nexus-2000-series-fabric-extenders/data_sheet_c78-507093.html

[camo]

Thanks @balaji.bandi 

So, both the FEX and its parent have to support FCoE?

Is that?

[balaji.bandi]

if you like to use parent switch as FCoE, you ignore FEX models and deploy directly on Parent switch to save resource,.

maybe your case may be different.

parent switch support.

https://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-switches/datasheet-c78-730273.html