11-27-2015 02:29 PM
How to monitor 220 series switch CPU usage and Temperature using SNMP? Thereis support of CISCO-ENVMON-MIB in datasheet - but when I try to snmpwalk throw oids - switch response with "CISCO-ENVMON-MIB::ciscoEnvMonMIB = No Such Object available on this agent at this OID". SNMPwalk throw all "ciscoMgmt" tree in atach
12-10-2015 12:00 PM
I have the same problem with SG220. We have also updated to the last firmware release (1.0.0.18 image) with no success (even when the 1.0.0.18 mib includes it).
When running snmpwalk to check available OIDs (quering for sysORID) we only get these:
SNMPv2-MIB::sysORID.1 = OID: SNMP-MPD-MIB::snmpMPDMIBObjects.3.1.1
SNMPv2-MIB::sysORID.2 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance
SNMPv2-MIB::sysORID.3 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance
SNMPv2-MIB::sysORID.4 = OID: SNMP-NOTIFICATION-MIB::snmpNotifyFullCompliance
SNMPv2-MIB::sysORID.5 = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup
SNMPv2-MIB::sysORID.6 = OID: TCP-MIB::tcpMIB
SNMPv2-MIB::sysORID.7 = OID: SNMPv2-MIB::snmpMIB
SNMPv2-MIB::sysORID.8 = OID: IP-MIB::ip
SNMPv2-MIB::sysORID.9 = OID: UDP-MIB::udpMIB
It would be nice to understand why it is not implemented while it is specified in the switch datasheet.
thxia
12-10-2015 04:51 PM
Hi Viatliy and Sergio:
i downloaded MIBs_Sx220_v1.0.0.18.zip, and I do see CISCO-ENVMON-MIB..
I do notice that you've stated you downloaded v1.0.0.18.zip
I'm not at my lab at the moment, but I will try it when tomorrow....
Thanks
Glenn
12-11-2015 01:35 AM
MIB exists, but switch isn`t support it.
12-14-2015 06:50 AM
I agree...the MIBs_Sx220_v1.0.0.18.zip file include it but there is no trace of CISCO-ENVMON-MIB when querying the switch through SNMP
12-15-2015 11:12 PM
Hi Sergio and Vitally:
We were able to replicate this and will be raising issue with DevEng. You will see a response shortly. Thanks for your support and patience..
09-11-2019 07:53 AM
Hello Glen...
Any news on this in 2019???
12-14-2015 11:20 AM
Hi Viatliy and Sergio:
I see now.. Okay, I'm checking out what needs to be done.. I'll post my responses here.
Thanks for your patience,
Glenn
04-05-2018 03:27 AM
Hi Glenn, after three years, do you have any solution?
Sorry for necroposting, but we have the same problem with 2x SG220 50p POE and we can't get the CPU load from snmpwalk with the OID: ".1.3.6.1.4.1.9.6.1.101.1.9.0 ".
THXIA
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide