08-01-2012 03:24 PM
Inline power (PoE)
Can some one confirm PoE Spec's and a little confused reading the spe'c
the spec say
●All 24 PoE ports on the Cisco Catalyst Express 500-24PC can supply up to 15.4W
(IEEE 802.3af standard maximum) of power over Category 5 cable, for a total of 370W
of inline power.
● Both the IEEE 802.3af PoE standard and Cisco prestandard inline power are supported
I have cisco 7940G witch are Prestandard so this switch will power the Phones on PoE ?
does not say it will supply PoE for Prestandard Phones just say its Supported
Thanks
Solved! Go to Solution.
08-01-2012 06:32 PM
Hi Colin,
Yes, the switch will power prestandard 7940s. Specs state it works on both 802af and cisco prestandard poe.
Best,
David
Please rate helpful posts and identify correct answers.
08-01-2012 06:32 PM
Hi Colin,
Yes, the switch will power prestandard 7940s. Specs state it works on both 802af and cisco prestandard poe.
Best,
David
Please rate helpful posts and identify correct answers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide