cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
723
Views
0
Helpful
2
Replies

CBS 350 SNMP - do these switches support all OIDS? errDisable?

redgasgiant
Level 1
Level 1

I want to monitor when ports go into error disable due to BPDU guard. 

On my test bench I can put my cbs350 into the situation and see that a port is disabled 

redgasgiant_0-1693323268518.png

but I can't seem to SNMPWALK the OID. Does the small business series even support this? 

redgasgiant_1-1693325000962.png

info@zabbix:~$ snmpwalk -v 2c -c public 10.xxx.xxx.xxx 1.3.6.1.4.1.9.9.548.1.3.1.1.2
SNMPv2-SMI::enterprises.9.9.548.1.3.1.1.2 = No Such Object available on this agent at this OID

I'm a OID and MIB noob and using this https://www.reddit.com/r/zabbix/comments/virx4m/monitoring_of_errdisabled_cause_by_linkflap/ as a starting point. 

 

2 Replies 2

balaji.bandi
Hall of Fame
Hall of Fame

CBS350 do not support all SNMP features as i see, but check there are some MIB you need to download and test it.

https://software.cisco.com/download/home/286282293/type/283415684/release/2.0.0.73

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

redgasgiant
Level 1
Level 1

Thanks BB, I have downloaded the MIB files... But I have to be honest.. I do not know what to do with them.  I have copied them into my /usr/share/snmp/mibs  on the machine I used to snmpwalk. But again, I have no idea what I'm doing!