02-04-2012 11:45 AM
I apologize if this discussion has already come up, but...
Does anyone know of any Visio stencils for the Cisco 300 Series SMB Managed Switches?
(specifically, for my shop, the SG300-28P?)
I've looked around, (VisioCafe, Google), but not found any 300 Series stencils.
Found the ESW 500 Series - which is CLOSE, but not the same...
Any help would be VERY appreciated!
04-23-2012 01:37 PM
Hi Jason,
No change yet... still in the production queue. There have been so many high priority requests from product groups that several projects are way behind schedule and I apoloigze for that. The 300 series is close though I can't commit to a specific date.
Brett Newman
Cisco Visio Development
Visimation Inc.
04-16-2012 08:09 AM
it would be great if the stencils could be posted for 300 series switches
srw2024p-k9-uk
srw2008-k9-g5
05-25-2012 12:47 AM
Hi Brett,
I see that there's not been a lot of movement on this post for a little while. Really keen to get hold of the 300 series Visio's is there anywhere else to get the original set?
I'm after the SF302-08P with/without rack mount kit, but a generic would suffice for now.
Thanks.
Rich.
05-25-2012 12:31 PM
Hi Richard,
I'm sorry but the SF302-08P is not in our approved production list:
SG300-10P
SG300-10P
SG300-28P
SG300-28P
SG300-52
SG300-52
SF500-24P
SF500-24P
SG500X-48P
SG500X-48P
I can put in the request for funding but it's not a speedy process.
Regards,
Brett
05-25-2012 12:40 PM
Any news on the SG300-10P
05-29-2012 11:56 AM
We expect to produce these within the next week to 10 days. The queue has been huge lately and it's also been interupted with "urgent" requests that need to be accomodated. My apologies but we're working on it.
Regards,
Brett
06-01-2012 04:08 PM
There will be a new Cisco Small Business 300-500 Series Switches Visio stencil on the download site within the next several days. It's been submitted but unfortunately I cannot control when the web team will actually post it. Usually it takes 24 hours but I've had several requests that took 3 days or more. Look for it in the Switches category on the download page:
http://www.cisco.com/en/US/products/hw/prod_cat_visios.html
Brett Newman
Cisco Visio Development
Visimation Inc.
06-05-2012 12:35 PM
It was just posted. Thanks for the help!
06-11-2012 01:38 AM
Where did you find that download?
When i look at the download list, there are only the ESW 500 but no 300 Switches.
06-11-2012 05:13 PM
Hello,
Here you go:
http://www.cisco.com/en/US/products/hw/prod_cat_visios.html
Regards,
Cindy Toy
Cisco Small Business Community Manager
for Cisco Small Business Products
www.cisco.com/go/smallbizsupport
twitter: CiscoSBsupport
08-20-2013 07:11 AM
Hello Cisco,
Any chance that the full list of SG300 and SG500 switches will be included in the stencil download any time soon? I ask because prior to the current posting I had already custom created my own for most of the 300 series switches. However, I'm immediately in need of the SG300-20 and don't necessarily have the time to create another from scratch.
I'm also certain that in the near future I'll need the full range of SG500 series as well. Is there a reason why some switches are included and some are not? Obviously the PoE vs. non-PoE vs. PoE+ wouldn't necessarily be an issue if there aren't separate ones for each. However, having the full portfolio of switch port numbers would be extremely helpful.
Thanks!
08-28-2013 07:14 PM
Hi,
Due to the large size of the All Products file, it no longer contains all of the latest updates. We are considering ways to reduce the size of the download but for now please go to the direct link for the Cisco 300-500 series:
Regards,
Brett Newman
Cisco Visio Production
Visimation Inc.
08-29-2013 06:49 AM
Hi there and thanks for the reply. Unfortunately that link delivers the same file as available on the site. It only has a few of the switches on it and not even close to the full list or the specific one I had requested. I have since had to create my own, again, which is extremely unfortunate due to the amount of time it takes.
09-05-2012 10:18 AM
Hi,
- I've found a little bug on the SG300-28P stencil.
the port '2' is shown twice instead of port 3.
- Why the SA-540 doesn't have connector for LAN ports near the physical LEDs shown ?
Vincent
09-14-2012 06:46 PM
Hi Vincent,
Thank you for finding that, and I apoogize for being slow to respond. I was on vacation the past two weeks. We've corrected that port number problem and I just submitted the update to be posted on the download page. It usually takes a day or two for that team to complete the process.
Brett Newman
Cisco Visio Development
Visimation Inc.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide