I have the above device connected to my Verizon Router using the 192.168.1.2 | 255.255.255.0 for its' management IP under VLAN 1. I have ports gi2-3 configured for VLAN 100, using 192.168.100.1 | 255.255.252.0. VLAN 1 is configured as a trunk port. I'm able to ping VLAN 100 (192.168.100.1) from the switch's GUI. However, when I connect an ethernet cable from port 2 or 3 from the switch to my laptop, I'm unable to receive a DHCP address and/or gain access to the internet. Any ideas as to what I'm doing wrong? Happy to provide screenshots if further explanation is needed. Thank you for your time.
