Connecting to camera recorder in SF300 switch

[Lenton22]

Hello,

I have Cisco SF300-48pp switch. The switch has only default VLAN and is used so far as simple access switch. I connected a Camera recorder, but the camera recorder's IP is different. I need to have access from my subnet to the camera recorder. My subnet is 192.168.10.x, while camera recorder's IP is static 192.168.200.10. I tried creating second VLAN for camera recorder, but everytime I try to set port to VLAN, the switch just freezes and it loses connection and all other connected devices lose network and then I have to unplug the switch to restore connection.

[Lenton22]

I switched the port layer to 3, where camera recorder is connected, which prevents switch from freezing when making changes to VLAN. So far I setup VLAN 2 (IP: 192.168.200.1), camera recorder's IP is static 192.168.200.152. My PC's network subnet is 192.168.10.x and I need to have access from my subnet to camera recorder, in other words I need routing, but whatever routing methods I try, they don't work.