Does anyone know how to get the current config of a WS-CE500-24LC switch?

[alexoncisco]

We are going to replace three WS-CE500-24LC switches with SG220-26P switches.  I would like to get the current config from the Catalyst Express 500s to either 1. import into the new devices or 2. at least use the current configuration to see settings that may have to be updated on the new switches.

[Charles Hill]

Duplicate posting........********************************

Not sure why the posting below is replicated several times.  I don't see the posting when I attempt to edit.  Any way this is a duplicate. 

""You can restore your configuration settings by using Network Assistant to save the

switch configuration file. After saving the configuration file, you must use the

device manager Restart / Reset window to reset the switch. After resetting the

switch, use the Express Setup window to assign a switch IP address and to assign

the same host name that was used before the switch was reset. Then you can load

the configuration file to the switch and restore the previous configuration settings.

For information about saving configuration files, see the Network Assistant

documentation."

See link below for the user guide .

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalystexpress500/release_12-2_25_fy/user/guide/ug.pdf

 You can download Network Assistant at the link below.

https://software.cisco.com/download/release.html?mdfid=280771500&softwareid=280775097&release=5.6.3&relind=AVAILABLE&rellifecycle=&reltype=latest&i=mmp

Hope this helps,

Please rate helpful posts.

Thanks.

- See more at: https://supportforums.cisco.com/discussion/12532511/does-anyone-know-how-get-current-config-ws-ce500-24lc-switch#sthash.miz3ncWo.dpuf

Hey alexoncisco,

""You can restore your configuration settings by using Network Assistant to save the

switch configuration file. After saving the configuration file, you must use the

device manager Restart / Reset window to reset the switch. After resetting the

switch, use the Express Setup window to assign a switch IP address and to assign

the same host name that was used before the switch was reset. Then you can load

the configuration file to the switch and restore the previous configuration settings.

For information about saving configuration files, see the Network Assistant

documentation."

See link below for the user guide .

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalystexpress500/release_12-2_25_fy/user/guide/ug.pdf

 You can download Network Assistant at the link below.

https://software.cisco.com/download/release.html?mdfid=280771500&softwareid=280775097&release=5.6.3&relind=AVAILABLE&rellifecycle=&reltype=latest&i=mmp

Hope this helps,

Please rate helpful posts.

Thanks.

- See more at: https://supportforums.cisco.com/discussion/12532511/does-anyone-know-how-get-current-config-ws-ce500-24lc-switch#sthash.gUkQ1mSP.dpuf

Hey alexoncisco,

""You can restore your configuration settings by using Network Assistant to save the

switch configuration file. After saving the configuration file, you must use the

device manager Restart / Reset window to reset the switch. After resetting the

switch, use the Express Setup window to assign a switch IP address and to assign

the same host name that was used before the switch was reset. Then you can load

the configuration file to the switch and restore the previous configuration settings.

For information about saving configuration files, see the Network Assistant

documentation."

See link below for the user guide .

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalystexpress500/release_12-2_25_fy/user/guide/ug.pdf

 You can download Network Assistant at the link below.

https://software.cisco.com/download/release.html?mdfid=280771500&softwareid=280775097&release=5.6.3&relind=AVAILABLE&rellifecycle=&reltype=latest&i=mmp

Hope this helps,

Please rate helpful posts.

Thanks.

- See more at: https://supportforums.cisco.com/discussion/12532511/does-anyone-know-how-get-current-config-ws-ce500-24lc-switch#sthash.gUkQ1mSP.dpuf