Solved: GVRP on Cisco CBS350

hammadbilal · ‎08-10-2023

Hi,

I am configuring CBS-350 24 Port switch that needs to be added in the production environment.

Currently, the GVRP is disabled on this switch.

I need to know while the GVRP is disabled, can I connect that switch with core switch 4500. I mean CBS switch will not impact the VLANs on the core switch and other access switches.

I have core switch model: 4500X-16

Access Switches: 3850-48-S

As I know that in CBS, vtp is replaced with GVRP.

Need suggestions.

marce1000 · ‎08-12-2023

- Indeed ,

Marc.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

View solution in original post

marce1000 · ‎08-10-2023

- When GVRP is disabled that also applies to all interfaces , so there will be no impact ,

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

hammadbilal · ‎08-12-2023

Hi Marce,

So I can simply connect the CBS switch in the production environment with GVRP disabled on it and it will not impact anything.

marce1000 · ‎08-12-2023

- Indeed ,

Marc.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

hammadbilal · ‎08-30-2023

Hi Marce,

Sorry for late response.

Thanks for your support. I connected the switch and the uplink was up without any impact.

However, after connecting the CBS switch with my core switch 4500CX-16, there was no reachability between them.

Uplinks were configured as trunk on both sides but still the management IP address was not reachable.

Any idea what could be the issue.