06-10-2019 02:14 AM
I downloaded MIB Files for Cisco 350. but It's very difficult to monitor my SG350 appliance and I couldn't check memory status of SG350.
I need memory OID for SG350 for monitor SNMP.
Solved! Go to Solution.
06-12-2019 01:44 AM
Hi,
My name is Puneet Sandel and I am Cisco network engineer providing technical support on small business devices. As per your query regarding memory utilization OIDs for SG350 switch, please find below the 2 OIDs that you can use to monitor memory utilization using SNMP.
ciscoMemoryPoolUsed : .1.3.6.1.4.1.9.9.48.1.1.1.5
ciscoMemoryPoolFree : .1.3.6.1.4.1.9.9.48.1.1.1.6
In case you face any issue feel free to contact Cisco frontline number and get a case opened with Cisco. We will definitely help you out with the issue.
You can contact Cisco by clicking the link given below.
https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
Regards,
Puneet Sandel
Technical Consulting Engineer
Global CX Centers – Small Business Support
06-12-2019 01:44 AM
Hi,
My name is Puneet Sandel and I am Cisco network engineer providing technical support on small business devices. As per your query regarding memory utilization OIDs for SG350 switch, please find below the 2 OIDs that you can use to monitor memory utilization using SNMP.
ciscoMemoryPoolUsed : .1.3.6.1.4.1.9.9.48.1.1.1.5
ciscoMemoryPoolFree : .1.3.6.1.4.1.9.9.48.1.1.1.6
In case you face any issue feel free to contact Cisco frontline number and get a case opened with Cisco. We will definitely help you out with the issue.
You can contact Cisco by clicking the link given below.
https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
Regards,
Puneet Sandel
Technical Consulting Engineer
Global CX Centers – Small Business Support
05-18-2020 07:03 AM
Hello there,
I check the two proposed OIDs for my case and does not work. Are there any other i can try?
I have the same switch SG350-10 but unfortunately I am struggling to find the OID for RAM, i could only find for CPU.
Thanks in advance
08-10-2020 01:24 AM - edited 08-10-2020 04:26 AM
What OID is for CPU?
And provided OIDs for RAM do not work for me either...
08-10-2020 01:29 AM
I am using this key for CPU usage
1.3.6.1.4.1.9.6.1.101.1.9.0
08-10-2020 02:55 AM
08-10-2020 04:16 AM
Not yet
08-10-2020 02:57 AM
02-09-2021 05:15 PM
Hi, it's different from catalyst, for SMB device, there is no memory OID.It could be check by command 「show tech memory」
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide