11-18-2017 11:15 PM - edited 03-21-2019 11:18 AM
Hi,
I need some guidance/help as I am new in the world of configuring switches.
I purchased the switch in order to setup a Ravenna AES67 network (Audio over internet protocol). For this I need to acces the administration page in order to upload a "Configuration File" however if I type in my webbrowers 192.168.1.254 it does not open the page.
All the procedures I found on the net are based on accessing the switch using a PC, I did not find any instruction using a Apple Mac.
Can somebody show me how to?
Many thanks in advance
Gaston
11-19-2017 09:46 AM
Hi @Gaston69
I don't believe this due PC or Mac.
First off, did you checked if you have IP on the same range as the switch?
Can you ping the switch?
-If I helped you somehow, please, rate it as useful.-
11-20-2017 12:42 PM
Hello Miranda
11-20-2017 12:54 PM
Same range means 192.168.1.10 for example.
I'm considering you are connecting your notebook on the switch directly.
After doing this open up a command line prompt and type ping 192.168.1.254.
-If I helped you somehow, please, rate it as useful.-
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide