Help with VLAN for guest WIFI

[apena]

Hello, I'm stuck with this scenario, I have read a lot of information on Internet but it doesn't work:

I need to configure a second SSID only for guest access, isolated from LAN data:

2x Access Point Linksys LAPAC1750PRO

Switch Cisco SG200-50p

Router Cisco RV320

Router is connected on Port 11 of the Switch

APs are connected on Ports 10 and 37.

----

APs setup: SSID for VLAN1 (default) and SSID for VLAN10 (guest):

Switch setup:

VLAN created

Ports on VLAN1:

Ports on VLAN2:

Which is the problem??

Thanks

[Lee Cox]

Ok then I say your isolated guess LAN is working.  Not sure how you are supplying DHCP IP addresses but it must be working if you are receiving an IP address on VLAN10.  So we are back to the Linksys. 

[apena]

Wow! I have just realized that I only set VLAN ID=10 for guest wifi on the 2,4 GHz radio!!!

The 5 GHz radio wifi was still with VLAN ID=1, and all my tests are with a Macbook, then is impossible to connect to VLAN10!!

The next time I will go to this customer, I test again and I tell you something.

Thanks!

[apena]

Well, finally this is solved. Thanks coxhaus01  for your support!