01-29-2020 07:29 AM
Hello everyone,
I was told to post this as a new thread so here I go, refer to the previous one for a summary of the situation:
I did not try any of the possible solutions such as upgrading firmware version just yet...
However, I was going through the Cisco article on STP and I wanted to share this screenshot with you
I ran this command on the interface having high error rates and high CPU usage:
(See attachment)
Do you guys think this may have something to do or are we still more on-board with the fact that is a switch bug?
Logically speaking about what I read, issues with infinite STP loops will definitely make the network slower or even unresponsive.
Thanks!
01-29-2020 01:13 PM
The switch is running 3.X.X, correct?
01-31-2020 08:51 AM
Thanks for replying, it is indeed.
So according to the article you mention, again, this is related to the bug on these switch and upgrading will be the only solution right?
Let me ask you this, will this affect any of my config on the switch? I have to be very careful as this is our coreswitch on the infrastructure.
01-31-2020 02:30 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide