I can't seem to find the default ip address to configure my Switches SG110-24 & SF100-24 and make vlan on them ?

[netfox66610258]

I can't seem to find the default ip address to configure my Switches SG110-24 & SF100-24 and make vlan on them ?

[marce1000]

 - Try 

   192.168.1.254

 M.

[netfox66610258]

Not working i tried ping the 192.168.1.254 but no host show up with this ip

[marce1000]

  - Note down the mac address, of your switches. Connect them to your network equipment and issue show ip arp. Correlate this with the mac addresses in order to obtain the IP address.  2) If DHCP is being used it could be that the devices get an address allocated by the DHCP server, in that case check the logs of the DHCP server to find out which IP addresses are being allocated to the switches.

 M.

[psandel · Accepted solution]

Hi Sir,

My name is Puneet Sandel and I am from Cisco small business technical support center.

I will like to make you aware that both the models specified in your query are unmanageable switch models and you won't be able to access web interface of these. These models do not support VLAN management like manageable switches.

Only Sx200,Sx250,Sx300,Sx350,Sx500,Sx550 switches are manageable switches and have a default IP address to login.

Sx90,Sx95,Sx100,Sx110 switches are all unmanageable switch models.

Please mark this post as the solution as it will help other people in the community also.

Regards,

Puneet Sandel