i want to add mac based VLAN in Switch CBS250-24P-4X - switch422fb2

[MehdiGhazi12826]

I want to make mac based VLAN by webinterface or ssh sisco commands how can i do that

my swith model is CBS250-24P-4X - switch422fb2

[balaji.bandi]

Can you explain more  "mac based VLAN" what this means to you ?

is this what you looking ?

https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-350-series-managed-switches/smb5657-configure-mac-based-vlan-groups-on-a-switch-through-the-cli.html

[Martin Aleksandrov]

Hi Mehdi,

Here is also a link with the CBS350 which is basically the same workflow:

https://www.cisco.com/c/en/us/support/docs/smb/switches/Cisco-Business-Switching/kmgmt-2533-configure-mac-based-vlan-groups-cli-cbs.html

And through the web GUI:

https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-350-series-managed-switches/smb3074-configure-media-access-control-mac-based-virtual-local-area.html 

Thanks,

Martin

[MehdiGhazi12826]

Hi
in my GUI doesnt exist option MAC-Based Group to VLAN the VLAN Management > VLAN Groups > MAC-Based Groups to VLAN.
CBS250-24P-4X 24-Port Gigabit PoE Smart Switch with 10G Uplinks
Version 3.1.0.57
thanks a lot
BR

[MehdiGhazi12826]

at my Web-GUI of switch missing the menu item      VLAN Management > VLAN Groups > MAC-Based Groups to VLAN

please see the attachment

how can i fix that ?
the switch modell is 250 series NOT 350 Series
CBS250-24P-4X 24-Port Gigabit PoE Smart Switch with 10G Uplinks
Version 3.1.0.57

[Martin Aleksandrov]

Hi Mehdi,

Apologize for the inconvenience. I haven't noticed it is a CBS250 series. MAC-Based Groups functionality is available at CBS350 series switches (https://www.cisco.com/c/en/us/products/collateral/switches/business-350-series-managed-switches/datasheet-c78-744156.html). We do not support that with the 250s (https://www.cisco.com/c/en/us/products/collateral/switches/business-250-series-smart-switches/nb-06-bus250-smart-switch-ds-cte-en.html)

Thanks,

Martin

[felix.schmitt]

Dear Martin,

thank you for the clarification! It is unfortunate that the online version of the Administration Guide for CBS250 and 350 series does not make this difference clear: https://www.cisco.com/c/en/us/td/docs/switches/lan/csbms/CBS_250_350/Administration-Guide/cbs-250-ag/vlan-management.html#ID-0000340e Only the downloadable PDF version for the CBS250 omits the "VLAN Groups" section.

Best regards,

Felix

[Martin Aleksandrov]

Hi Felix,

We will address this issue with the respective team so they can fix the online CBS250/350 administration guide. 

Thank you for the heads up!

Regards,

Martin

[jimstewart77]

The online documentation is STILL wrong on this.

https://www.cisco.com/c/en/us/support/docs/smb/switches/Cisco-Business-Switching/kmgmt-2252-configure-mac-based-vlan-groups-on-a-switch-through-the-cli.html

This says mac based vlans can be configured on a CBS250 post version 3.  It lies.  Just bought a CBS250 to do this (based on the above link) and its going to have to go back.  Waste of time and money.