Hello,
I am trying to set up bidirectional multicast across multiple VLANs with the SG350. I have the following interfaces defined:
Port 1 is an access port in VLAN1
Port 2 is is a trunk port, untagged VLAN1, tagged VLAN2, tagged VLAN3
Port 3 is is a trunk port, untagged VLAN1, tagged VLAN2, tagged VLAN3
My objective is to share (flood) multicast between VLAN1, VLAN2 and VLAN3.
Is this possible with the SG350? If so, I would greatly appreciate any information on how to configure.
Thanks,
Denny