It would be helpful to know

Rodante Evangelista · ‎04-23-2015

I still have a problem on routing of sg300 L3

Can someone help me on this

User Name:cisco
Password:*****

SOW#sh run
config-file-header
SOW
v1.3.0.62 / R750_NIK_1_3_647_260
CLI v1.0
set system mode router

file SSD indicator encrypted
@
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
!
vlan database
vlan 10-15
exit
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
ip dhcp server
ip dhcp pool network vlan-10
address low 10.1.10.1 high 10.1.10.254 255.255.255.0
default-router 10.1.10.1
dns-server 212.77.192.59 212.77.192.60
exit
ip dhcp pool network vlan-11
address low 10.1.11.1 high 10.1.11.254 255.255.255.0
default-router 10.1.11.1
dns-server 212.77.192.59 212.77.192.60
exit
ip dhcp pool network vlan-12
address low 10.1.12.1 high 10.1.12.254 255.255.255.0
default-router 10.1.12.1
dns-server 212.77.192.59 212.77.192.60
exit
ip dhcp pool network vlan-13
address low 10.1.13.1 high 10.1.13.254 255.255.255.0
default-router 10.1.13.1
dns-server 212.77.192.59 212.77.192.60
exit
ip dhcp pool network vlan-14
address low 10.1.14.1 high 10.1.14.254 255.255.255.0
default-router 10.1.14.1
dns-server 212.77.192.59 212.77.192.60
exit
ip dhcp pool network vlan-15
address low 10.1.15.1 high 10.1.15.254 255.255.255.0
default-router 10.1.15.1
dns-server 212.77.192.59 212.77.192.60
exit
bonjour interface range vlan 1
ip access-list extended 1
permit ip any any
exit
hostname SOW
no passwords complexity enable
ip telnet server
!
interface vlan 1
ip address 1.1.1.1 255.255.255.0
no ip address dhcp
!
interface vlan 10
name vlan-10
ip address 10.1.10.1 255.255.255.0
!
interface vlan 11
name vlan-11
ip address 10.1.11.1 255.255.255.0
!
interface vlan 12
name vlan-12
ip address 10.1.12.1 255.255.255.0
!
interface vlan 13
name vlan-13
ip address 10.1.13.1 255.255.255.0
!
interface vlan 14
name vlan-14
ip address 10.1.14.1 255.255.255.0
!
interface vlan 15
name vlan-15
ip address 10.1.15.1 255.255.255.0
!
interface gigabitethernet1
switchport mode access
switchport access vlan 10
!
interface gigabitethernet2
switchport mode access
switchport access vlan 11
!
interface gigabitethernet3
switchport mode access
switchport access vlan 12
!
interface gigabitethernet4
switchport mode access
switchport access vlan 13
!
interface gigabitethernet5
switchport mode access
switchport access vlan 14
!
interface gigabitethernet6
switchport mode access
switchport access vlan 15
!
interface gigabitethernet7
switchport mode access
!
interface gigabitethernet8
switchport mode access
!
interface gigabitethernet10
ip address 10.1.1.2 255.255.255.0
storm-control broadcast enable
storm-control broadcast level 10
spanning-tree link-type point-to-point
service-acl input 1 default-action permit-any
switchport trunk allowed vlan add 10-15
macro description router
macro auto smartport type router $native_vlan 1
!
exit
ip default-gateway 10.1.1.1
SOW#

Charles Hill · ‎04-23-2015

Hello Rodante Evangelista,

Do a show ip int brief, please and post the output.

Are all your vlans up?

Hope this helps,

Please rate helpful posts.

Thanks.

Rodante Evangelista · ‎04-25-2015

SOW#show ip interface
GigabitEthernet IEEE 802.3 Gigabit Ethernet port id
GE IEEE 802.3 Gigabit Ethernet port id
Port-Channel Valid Port-Channel interface.
vlan Valid VLAN interface.
<CR>
SOW#show ip interface ge 10

IP Address Type Directed Precedence Status
Broadcast
------------------- ----------- ---------- ---------- -----------
10.1.1.2/24 Static disable No Valid

Charles Hill · ‎04-25-2015

Take a look at this posting. It discusses setting up routing on a sg300 router.

https://supportforums.cisco.com/discussion/11520346/cisco-sg300-10-how-set-inter-vlan-routing

hope this helps,

please rate helpful posts

thanks

devils_advocate · ‎04-24-2015

It would be helpful to know what the actual problem is.

"I still have a problem on routing of sg300 L3"

This doesn't really tell us what the issue is.

Its like taking your car into a garage and simply saying, 'I have a problem, please fix it'

Thanks

Rodante Evangelista · ‎04-25-2015

If you have sg300 you can help but if you dont you cannot.

as stated "SG 300 L3 routing problem"

so what do you think

I need a complete routing for sg300

if you have a running config of sg it is better because it is proven.

thanks

devils_advocate · ‎05-06-2015

I have an SG300 and have set plenty up but based on your attitude, I no longer wish to help.

Good luck.