SG200-08 firmware upgrade

[avi.barilan]

Hello All

i have recently purchased a new sg200-08 switch.

i love it, but something is not working for me - hope you can share some wisdom.

i am trying to upgrade the swtich firmware.

i have downloaded the latest firmware from here: 

https://software.cisco.com/download/release.html?mdfid=283454003&softwareid=282463182&release=1.0.8.3

went inside my swtich management web ui to the firmware upgrade section,

when i click on apply,

all i am getting is a new popup page with an "ok" buttin and nothing happens.

what am i missing?

[brandonshiner]

Have you tried rebooting the switch? I have an SG200-26 and after a firmware upgrade, I have to reboot the switch manually for the new firmware to be loaded.

[CubanFrog]

Use Internet Explorer and add switch URL to the Compatibility View List.

[alvaro.orrego · Accepted solution]

This trick worked to get the update process running. It took a while to upload and the switch lost the static IP it had configured after the reboot and went back to DHCP.

[Kov35197]

That did it for me. Good thing to have an old laptop with Windows 7 and Internet Explorer 11.

Thank you very much indeed