05-01-2019 11:35 AM
I want to update the firmware on a Cisco SG200 50 Port PoE smart switch. When I go to the Cisco product page:
I see the latest update as version: 1.4.10.06 and my update file is called: sx200_fw-14106.ros
My switch already has firmware version: 1.4.2.4
I have 2 questions:
1- Is this the correct firmware for my switch?
2- Do I also have to update the MIB ?
Solved! Go to Solution.
05-02-2019 12:11 AM
Hi there,
Yes that is the correct software version.
The MIB file is for use in an SNMP browser, to assist with querying any new OID that may be present in this release. It is not necessary to download this file.
cheers,
Seb.
05-02-2019 12:11 AM
Hi there,
Yes that is the correct software version.
The MIB file is for use in an SNMP browser, to assist with querying any new OID that may be present in this release. It is not necessary to download this file.
cheers,
Seb.
05-02-2019 06:44 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide