We recently announced the release of our self-serve virtual assistant. You can read the full announcement here. Videos and documents are available within a click for our latest products. Once you've told the bot what device you're using, the context ...
Forum Posts
(Updated September 2023 - Added Catalyst 1200 and Catalyst 1300 ) Hello! This sticky-post will serve as a sign-post for incoming community members. Below you will find links to pages that you may find helpful. Catalyst 1200 & 1300 Hardware Install...
My relatively new SG95-24 switch suddenly stopped working. THe PWR LED light is on but none of the ports light up and there is a constant beeping sound from the switch. Is there any way to troubleshoot this?
Edit: Change title as it's look like the problem come from the SG250-08 PD. See next post. Hello,I would like to report/share a bug I discover on the SG250-08HP switch. It run the last actual firmware (2.4.5.71) and it supply power to a SG250-08 swit...
Good Evening,My apologies if this is the incorrect board, this is my first time posting.I need some clarification as to the possible problem...I have a WS-C2960X-48FPD-L switch running IOS 15.2(7)E0a. When we run the internal diagnostic the TestPortA...
sg300 sntp doesn't sync periodically.It has synced once and it doesn't update it anymore, unless I re-config the sntp on the sg300.Anyone has got the sntp properly setup ? A simple topology:ISP --- [puplic ip] c800 router [172.31.1.1] --- [172.31.1.2...
Hello I found this link https://documentation.meraki.com/zGeneral_Administration/Licensing/Cisco_Meraki_Licensing_Guidelines_and_Limitations#Managing_Licenses that says how to add a new licence to a dashboard. However, it mentions to go to Organizat...
I have Cisco SG500-52P switches. I have a switch that I have split into 2 VLANS, ports 2-24 are on VLAN 2 and 25-48 are on VLAN 4. The problem is with the VLAN 4 ports, my settings have not changed on the VLAN 4 ports, however, they no longer have ac...
Hello folks.I'm working for an organization that has multiple SG300 switches and 4 VLANs (VLAN10, 20, 30, and 40).I'm at a point where I need to add a new VLAN to the existing network but I've never done it before.I've been able to create a new DHCP ...
I have two Cisco SG300-52P switches at a remote location. My IT person has left the company and I don't have the logins or passwords for these two switches.Is my only option to reset these two switches to default settings?
Dear Cisco Community, I have little hope for this, but still ask: do you have any ideas for simulating the small business switches? My scenario at work is that I'm working with a lot of these switches in changing environments at a weekly basis. Now ...
HiI am looking at purchasing x2 Cisco SG550XG-24F switches (in a stack). I currently have 2 of them in 10Gb BASE-T and functionality wise work great for us. I am trying to wrap my head SFP+ and the question I have is:Will Twinax Cable (SFP-H10Gb-CU1M...
Hi AllDoes anyone know if the Cisco SR2024 support LAG.
Hi all, have an old SG200 here that was trying to get going for use in a small office. However, booting it up and connecting directly to my laptop, link lights turn off after about 10 seconds. It looks like it will connect, but then it disconnects sh...
Hello, I configured 3 VLAN on a SG350-28P : VLAN 1 (192.168.1.0 /24) +------------------------...
Hello Guys, Is there any service timestamps log datetime equivalent command for Cisco SG350X. Thank you very much in advance. Regards,
I've been trying to enable SNMP by following these steps: 1. Going to SNMP -> Communities, and setting up a new community.2. Going to Security -> TCP/UDP Services, checking Enable for SNMP Service, and clicking Apply. When I do this, the web UI stops...
