I have the following
Asus RTN16 Router ( WIth Tomato Shibby Firmware)
TWO VLANS (Plus Default )deployed on router , #3. #4
TWO Gateway Interfaces for each VLAN ( 10.10.3.1 & 10.10.4.1)
SG300 Smart Switch ( In Layer 3 Mode )
VLAN Trunk tagged Default , VLAN #3, VLAN #4
Access Ports for VLAN #3 and VLAN #4 , some default
VLAN config is shown :
Diagram is below
I can get full network access from the server logged in locally ( internet access and can ping the different VLAN gateways )
However the Client PCS on the access ports VID3 and VID4 are not getting any IP address from the server .
I have enabled DHCP relay , and added the DHCP server address to the switch , as shown below
IS there something I am missing here?
