SG500X-58 - Native stacking mode

[ltobal]

Hi!

The switch SG500X-48 has 4 SFP+ ( 10G ) ports - XG1, XG2, XG3/S1, XG4/S2 - and two configuration modes - standalone and "native stacking".

Can I use XG1 and XG2 SFP+ ports to connect servers when "Native stacking" mode is active ?

Thanks,

Leonardo.

[Tom Watts]

Hi itobal, yes you may. xg1 and xg2 are not combo port to xg3 and xg4.

-Tom
Please mark answered for helpful posts