SRW2048 extended vlan support

[jbeltrame]

We are looking to use some SRW2048 in replace of some 2960 switches.  Do the SRW2048 support extended vlan ( 1-4094 )

Thanks,

Jason

[David Hornstein]

Hi Jason,

The manual does state;

VLAN Management Tab - Create VLAN

The Create VLAN screen provides information and global parameters for configuring and working with VLANs.

VLAN ID (2-4094). Indicates the ID number of the VLAN being configured. Up to 256 VLANs can be created. This

field is used to add VLANs one at a time. To add the defined VLAN ID number, press the Add button.

VLAN Name.

Of course the default VLAN  ( VLAN ID=1) is enabled by default on all ports.

Hope that helps

regards Dave

[kohlerj88]

It is important to note that the SRW2048 is a layer 2 switch and does not support IP VLAN routing. It

will support VLANs but will not effectively route inbetween them.