Switches - Small Business

Sorry if I posted in the wrong thread but I was told that Cisco Small Business Support Community was now handling these products.I bought a 8-Port Gigabit Switch (EG008W ver. 2) on eBay and was told it was working perfectly. Well as I try to set the ...

Brand new SRW2008MP, trying to setup for the first time and I am unable to get to the web GUI at 192.168.1.254.Removed IE 8 and went back to IE 7, removed Firefox 3.6 and installed 3.5 with IE Tab but still no luck.

hello is there a way to properly configure the GIBICs on these switches?I  have 2 EXS540-24 port on Switch 1 i have the GIBIc on port GE3 on Switch2 I have the GIBIC on port Ge4,however on Switch1 port 12, i can't connect anything it looks like the G...

HelloI need to configure a port for a server on the Voice Vlan, however when I do so i get an error and the status is unknonwn and the port isn't working properlyhow do i appropiately configure a port on this switch to be on the voice vlanthanks

HiWe have a medium size network consisting of about 25x SRW2024 switches and 8x SGE2000 doing the routing in layer 3 mode. We have about 100 vlans in total and everything is setup and all works fine until we have a power issue. Sometimes when the pow...

Hi,I was wondering if someone could tell me if there are any Cisco Small Business Switches which support dynamic routing protocols, and are all gigabit ports?I saw the SFE2000, but this is a 10/100 ethernet switch, and only supports static routing fr...

I am a managed switch n00b.  Please forgive my lack of experience, but I think I have a relatively simple situation that I am just not totally clear on.System configuration:T1 from Cox => WAN Port of WRVS400N wireless RouterPort 1 of WRVS4400N to g1 ...

I am trying to find an unmanaged cisco switch that has cdp.  Technically the switch doesn't have to be unmanaged, but I am looking for a cheep switch with only 5-10 ports that also has cdp.  I can't be sure if the small cisco SD series switches, form...

I just received my brand new SLM2024 managed switch.  I connected my laptop to the switch via cable (turned off my wireless connection), opened up FireFox and entered 192.168.1.254 into the address bar.   No response.  I tried several ports on the SL...

Hi,I have got two smb pro switches and both of them are SMB PRO 520 switches. Can them be stacked or it has to be dot1q trunk to conenct them together?rgdsarman

Hi There!  This is my first post and I have no idea what I am doing when it comes to SNMP.  We are trying to evaluate our network performance, so we have downloaded a copy of Solarwind’s Orion and installed it on a server.  The topology is as follows...

I have a workstation on this switch that is running WireShark and I need to get packets to it.  However the moment I turn on port mirroring the station loses IP connectivity to the network.  I tried Rx only, Tx only and both and all three settings kn...

Hi,My Linksys SE2005 (v2.1) switch does not work with my Belkin N1 Vision router.If I cable a PC direct to the router it works. If I cable via the switch it does not work - the PC cannot configure the network settings (it can't even access the router...

I have a Linksys SGE2010P 48 Port switch with POE and I cannot get the firmware to upgrade.I have downloaded the firmware software from the site: http://www.cisco.com/en/US/products/ps9985/index.htmlEverytime I run the EasyUpgrade application I get t...