Hello All,
My company is currently having issues with the SG 200-08, in that when
we're sending an Ethernet Frame through the switch consisting of an
802.1Q VLAN 0 priority tag and custom payload, the smart switch is
stripping the 802.1Q tag from the frame.
Another Cisco Product, the SG100D-08 Unmanaged Switch will properly
forward the Ethernet frame in its entirety, and exhibits the behavior that we
wish to achieve out of the SG 200-08
Is there any way to configure the SG 200-08 so that it does not strip the
VLAN 0 Priority tag?
Supplemental Info:
- Switch FW Version: 1.0.1.0
- Wireshark & port mirroring have been used to verify that the VLAN tag is properly being transmitted to the switch, but removed when going to the targetdevice.
Thanks!
