Switches - Small Business - Page 322

Looking for support docs and videos? Check here

We recently announced the release of our self-serve virtual assistant. You can read the full announcement here. Videos and documents are available within a click for our latest products. Once you've told the bot what device you're using, the context ...

Helpful support links - Updated September 2023 w/ Catalyst 1200 - 1300

(Updated September 2023 - Added Catalyst 1200 and Catalyst 1300 ) Hello! This sticky-post will serve as a sign-post for incoming community members. Below you will find links to pages that you may find helpful. Catalyst 1200 & 1300 Hardware Install...

SG300 layer 3 routing question

A RV 180 is configured as follows:VLAN 1 and 2 are configured. Inter-VLAN routing and device management is enabled on both VLANs.The SVI for VLAN 1 is 192.168.1.1The SVI for VLAN 2 is 192.168.2.1A SG300 is configured as follows:Layer 3 mode is enable...

Resolved! VLANs with L3 Switch (SG-500)

Hi,I'd like to know how to configure VLANs in SG-500 with it's L3 functionality (switch router).The switch is up and running currently in L2 mode and has a few hosts connected to it.Some questions I have:If I switch it to L3 (set system mode router) ...

Native VLAN mismatch detected on interface gi1/1/1 - SG500X

Hi all,I am having a couple of issues setting up my new SG500X switches and would really appreciate some help from you clever folk. Our old network (192.168.0.0/17) is connected to our new SG500X stack via an access port setup with an IPv4 Interface....

Problem in SG300 POE 28 port

Dear i have problem in Poe port i have Access point TP link tl-wa5110g High Power when i bluged in switch i can`t take power from switch note Acess point support Poe in put power 12V 1 A thanks..

Resolved! SG-500-28P How to view mac address table?

The standare Cisco IOS command is show mac-address-table. This command isn't available on this switch.FW v1.3.0.62Thanks.

Configured from console on SG500

Hello, I have a few SG500 Switches in the network for L2 access along with a bunch of bigger Cisco switches. On the Cisco switches, when we get off the config mode, a logging messages shows up, something like the below.%SYS-5-CONFIG_I: Configured fro...

Cisco SB SF200-24 IPMB?

Hi,this switch has function IPMB ?

Resolved! Cisco SGE2010P LAG in trunk or access mode?

Hi.I have a customer who has two of SGE2010P connected by four LAG ports.Switch A has all the users and B has all the server. They all operate in vlan 1.Now I had to add in Access Point with Multiple SSID. Here the port I created trunk port since the...

Resolved! Connect 2 SG200-26 switches using two separate vlans

B"HOkay, I'm going to cry uncle and ask the cisco community for help here...here's what i'm looking to accomplish. I have two cabinets in a datacenter with four available cross connect cables. I would like to set up two LAGs between the two switche...

Resolved! how to block port communication

hi there, i have cisco sg-300 cisco switch. i want to make connections between 2nd to 3rd port, and block communication between 3rd and 4th port. in brief, 2nd port must access all other ports which is in same switch,, 3rd port sh...

VTP on SG300-28

We bought an SG300-28. I read (http://www.cisco.com/en/US/partner/prod/collateral/switches/ps5718/ps10898/qa_c67-618260.html), that on the SG300-28 is working with Catalyst. The feature VTP called on the SG300 GVRP. I activated this features, but it ...

SG300-10MP boot error

I have many SG300-10MP switches. I went to install one, and when I powered it up, it did nothing. The system light flashed. Left it 10 minutes and nothing. The next day, I plugged in to the console port and booted the switch. It asked me for the...

SF 302 switch, Firmware 1.3.0.62 & Address Translation Tables

We have used a number of LinkSys/Cisco Small Business Switches over the years in our infrastructure. As part of our network monitoring, we use SNMP to query the Address Translation tables of our switches on a schedule (mib: 1.3.6.1.2.1.17.4.3.1.1).W...

N/W Connectivity problem in - CISCO SG- 24-port compact Gigabit switch with 2 Combo Mini-GBIC Port

My name is Rajesh. Currently we require your help in troubleshooting CISCO network switch.Current Scnario - Currently in our LAN Network, we need to replace a 48 port Dlink switch with newly procured two 24 port switches.The specification of existing...

SG200-26P will only provide POE to up first two ports

Hello.I just purchased an SG200-26P. Try as I might, I cannot get it to power up more than GE1 and GE2. Networking works just fine on all ports, but PoE is only available on the first two ports.I have compared the configuration both in the GUI and af...

Switches - Small Business

Forum Posts

Looking for support docs and videos? Check here

Helpful support links - Updated September 2023 w/ Catalyst 1200 - 1300

SG300 layer 3 routing question

Resolved! VLANs with L3 Switch (SG-500)

Native VLAN mismatch detected on interface gi1/1/1 - SG500X

Problem in SG300 POE 28 port

Resolved! SG-500-28P How to view mac address table?

Configured from console on SG500

Cisco SB SF200-24 IPMB?

Resolved! Cisco SGE2010P LAG in trunk or access mode?

Resolved! Connect 2 SG200-26 switches using two separate vlans

Resolved! how to block port communication

VTP on SG300-28

SG300-10MP boot error

SF 302 switch, Firmware 1.3.0.62 & Address Translation Tables

N/W Connectivity problem in - CISCO SG- 24-port compact Gigabit switch with 2 Combo Mini-GBIC Port

SG200-26P will only provide POE to up first two ports

Congratulations to the Event Top Contributors Class of 2024!

Cisco + Splunk: It's a new day for your data.

A new chapter of the Spotlight Award begins!

Join us in Celebrating the New Year and the Nov.-Jan. Winners!

Announcing Resources That Guide You to Success

Cisco Business Product Family

Cisco Switching Product Family

Connecting comcast internet to home lab

Cisco SG350 with Firewalla Gold -- VLAN with no Internet Access

Sg300 Switch snmp metrics

Update Catalyst 1300 via CLI

Need MAC addresses of specific port, not all possible ports