VoIP QoS on SGE2010p

750langlois · ‎07-22-2012

hello,

Need help to configure QoS on a SGE2010P. It's for VoIP. I setup it's own vlan but doesn't seems to be the solution.

What is the best way to set it up? i already look at that document but i'm not sure what to do http://www.cisco.com/en/US/docs/switches/lan/csbms/sge2000/reference/guide/sge_refguide.pdf

Any advice is appreciate.

paolo bevilacqua · ‎07-22-2012

Wrong forum, post in "small business - switches". You can move your post using the actions panel on the right.

Davidwagman1 · ‎07-24-2012

Hi,

Take a look at this thread. The SGE2010p is slightly different, but the web ui should be relatively similar:

Best,

David

Please rate helpful posts.

750langlois · ‎08-01-2012

Hello David,

Nice post, but the SGE2010p seems to be a little different.. have a look at this and let me know what you think about it..

1st i set up the advanced mode here..

i create the policy table here;

ClassMap is a little bit different..

I can't select any because no ACL has been created.. but i do not know where to create ACL.

Any Idea?

Davidwagman1 · ‎08-01-2012

After you add a Class Map, go into policy table. Are you able to add/edit the policy to include that class map?

Best,

David