06-02-2016 07:18 AM - edited 03-08-2019 06:03 AM
I need to connect a legacy device with 100Mbps to Cisco Nexus Switch (C5672UP + C2348UPQ). But it seems Nexus dosen't support 100Mbps any more.
Any other workaround such as future OS release or special model SFP? Thoughts?
Solved! Go to Solution.
06-02-2016 08:06 AM
The N5600 doesn't support the 100Mb on itself, but you can connected a FEX
(N2348TQ or N2248TP-E) to it to get the 100Mb copper. You can get the 1G
Copper and Fiber by using the right optics (GLC-T for 1G copper, and SFP for 1G
fiber) on the N5672UP/N56128P/N5696Q.
HTH
Regards
Inayath
06-02-2016 08:06 AM
The N5600 doesn't support the 100Mb on itself, but you can connected a FEX
(N2348TQ or N2248TP-E) to it to get the 100Mb copper. You can get the 1G
Copper and Fiber by using the right optics (GLC-T for 1G copper, and SFP for 1G
fiber) on the N5672UP/N56128P/N5696Q.
HTH
Regards
Inayath
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide