Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I need to connect a legacy device with 100Mbps to Cisco Nexus Switch (C5672UP + C2348UPQ). But it seems Nexus dosen't support 100Mbps any more.
Any other workaround such as future OS release or special model SFP? Thoughts?
Hello, I want to create a read only role on Nexus 5K/7K. Only allow some Nondestructive commands. Is there any good template for Read-Only Role? Any equivalent one predefined? Thanks!
Does B22hp support FC uplink to Nexus 5K Unified Port, instead using FCoE to non-Unified Port? I only saw FCoE at the deployment guide. To my understanding, FC only use 8Gb, FCoE can fully use 10Gb bandwidth. If it supports both FC and FCoE, Any oth...
We have 10 blade servers, each blade has 4 CPU sockets, each socket/CPU has 12 Cores.In calculating the license for Nexus 1000v.If Physcial CPU means sockets. then the number will be 10x4=40.If Physical CPU means cores, it will be 10x4x12=480. Please...
Thanks for responding! However, there is a note like below.Denotes hardware Capable. Software Support for the Feature planned for Future releases. It indicated to me 100Mb is NOT supported at this moment. Correct?And we can't tell when is the future...
Thanks for the workaround! I believe it gonna to work.But this is operatoinal change. It shouldn't cause a reboot. Hope Cisco can fix this issue in future release.
Thanks for help!It turned out that Cisco issued PAK of CSACS-5-BASE-LIC instead of R-CSACS-55VMUP-K9= which is not a real license that can be uploaded to ACS5.5.
Thanks for explanation!It means I will have to download the license. I will have to follow up with the reseller. because I didn't see any migration license at eDelivery or any PAK in order notification email.
