cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4644
Views
0
Helpful
3
Replies

10GBase-T support on nexus 3000 series

ara.antranik1
Level 1
Level 1

hi

 

do you know if any of the nexus 3000 series support this module?

Cisco SFP-10G-T-S Compatible 10GBASE-T SFP+ Copper RJ-45 30m Transceiver Module

 

 

i cant find it on ciscos transceiver matrix. and in the datasheets you only see 1gig glc transceivers.

3 Replies 3

balaji.bandi
Hall of Fame
Hall of Fame

Look at the compatible matrix.

 

https://tmgmatrix.cisco.com/home

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

maserran
Cisco Employee
Cisco Employee

Hello Ara,

 

As far as I know Cisco does not have any 10GBase-T SFP; "SFP-10G-T-S" is not a valid PID in Cisco Pricing List.  After some research I found this SFP but I think (my personal opinion) that Cisco TAC will not support it:

https://www.fs.com/products/66613.html

 

 

On the other hand there are several Switches with 10GBase-T ports:

 

https://www.cisco.com/c/dam/en/us/products/switches/nexus-9000-series-switches/nexus-9300-10GbaseT-switches-comparison.html

 

Maybe you can use the Cisco SFP+ Copper Twinax direct-attach cables; these cables are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks.  Again you need to validate compatibility (both ends) with https://tmgmatrix.cisco.com/home and required distance.

 

Could you please elaborate on your requirement in order to offer a more adequate response?

 

 
Thanks
 
Manuel

maserran
Cisco Employee
Cisco Employee

Hello Ara,

 

As far as I know Cisco does not have any 10G-Base-T SFP.  ‘SFP-10G-T-S’ is not a valid PID in the Cisco Pricing List.

 

After some research I found this, but I think (my personal opinion) that Cisco TAC will not support it:

https://www.fs.com/products/66613.html

 

On the other hand, there are several switches that have 10G-Base-T ports:

https://www.cisco.com/c/dam/en/us/products/switches/nexus-9000-series-switches/nexus-9300-10GbaseT-switches-comparison.html

 

Maybe you could use Cisco SFP+ Copper Twinax; these direct-attach cables are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks.  You need to verify compatibility on both ends ((https://tmgmatrix.cisco.com/home) and determine the right length.

 

Could you please elaborate on your requirement in order to offer a more adequate response?

 

Thank you.

 

Manuel

Review Cisco Networking for a $25 gift card